While I was taking my first classes at Pacific Basin School of Textiles in Berkeley, I took a class at the College of Marin. I wanted to make a color blanket which I thought would be a nice shawl. My teacher, Nancy Soper, picked out the yarns for me. I didn’t appreciate her wisdom at the time but liked what she chose. Instead of taking each color from the Color Wheel like the samplers we usually see, she chose colors that were related. And they ranged in steps from yellow to purple using colors in ½ of the color wheel. She used an interesting array of yarn types to get the right color shades in the warp. The edges were quite uneven given fat and thinner yarns but for a shawl that wasn’t a problem then. Usually all of the colors in the warp are then used as wefts to see how they act when crossed with one another.
Choose colors you like or are likely to use. For example, you might like olive green and use that instead of a harsh pure green or yellow-green. Most color blankets I’ve seen are made with pure colors from the color wheel. Colors that I will never use in real life. A color blanket can be for reference or for a project, such as a scarf, table runner, or actual blanket. Watch out for yellow if you want to make something for its looks. Yellow is so light and that makes it show up much more than other colors. Use less of it than the others and you will be happier with the overall look of the finished project.
Here is a color blanket made for reference. A business in India needed to know how the threads they were going to use blended or not. It was made primarily for reference only. However, some thought went into the organization where the warm and cool colors showed up. Thus, a scarf was made as well. I suggest using colors in your stash that you are likely to use—NOT every color there is, but ones you relate to and like.
In my case, this color blanket was basically made for reference it turns out. Because of this, the color chosen was more important than the type of yarn. Woolen, chenille, worsted, mohair, and novelty yarns were used. These differences resulted in the edges bowing in and out and the cloth being somewhat puckered.
I wove half the blanket/shawl in plain weave. I discovered the colors blended quite well with this structure. The closer the colors are on the color wheel, the more they blend. The edge colors (yellow and purple) are farther apart on the color wheel and don’t blend as well. That’s why I made those warp stripes narrower, especially I used less yellow than the other colors both in the warp and weft.
The twill half was a disaster in my opinion, especially where the light yarns crossed contrasting dark yarns. (I had just learned to draft some twills as you can see.) Compare this with the same yarns crossing in plain weave above. This was an important lesson I learned. Structures with floats don’t blend as well as plain weave where every other thread is woven in.
The shawl was a disappointment as a shawl, but I hated to just throw it out or bury it in a drawer. A good friend suggested I use it on my bed. I look at different sections and don’t worry about the uneven edges or chenille yarns that are worming.