In a previous post: “Changing My Mind and a Dilemma” I showed a curious sampler and a beautiful black scarf or shawl with stitching patterns. A weaver asked how the patterning was done. I spent a day figuring it out. I pulled out a long roll of stitched shibori paper which was a big help. That needed its own post (Part One). Here is Part Two which builds on the information in Stitched Shibori Part One.
One of the things I liked about both the sample and the scarf was that the intensity of the stitching pattern went from distinct gradually to blurry. I especially liked that the ends of the scarf were black with hardly any of the stitching pattern showing at all. That told me that the black ends were inside where the resist was the faintest. And the stitched patterns were most distinct in the middle of the scarf. Then the pattern gradually faded and got more and more blurry until at the ends it barely showed. How the strips were accordion folded to make this happen was an issue. Another thing I noticed that the fabric was quite thin. That would make stitching through many layers doable. I took a strip of paper to experiment with the folding steps. I hope it is understandable.
Almost immediately I noticed that the scarf was made in narrow strips sewn together with generous seam allowances showing on the wrong side. Again, this related directly to the design of the sampler. And narrow strips would be easier to work with. The seams were interesting in themselves. There was space between the cloths sewn together yet it looked like regular sewing machine stitching. Was a card or something sewn in with the seam and then removed??
Step One is to get the ends of the strips to be INSIDE so they won’t show the stitch resist or barely hint at it. Fold the strip in half and make the ends together. Then the other folds will be more and more on the outer sides of the bundle to make the stitching pattern less and less blurry–or more distinct depending on how you think of it. I penciled in shading on my paper strip to make sure the ends were inside the bundle.
Step two. Prepare to fold the strip.
Step Three: Make the first fold of the fabric.
Step Four: Continue folding each half of the strip in accordion pleats. You will need to figure out the dimensions of the folds.
Step Five: Fold the last time on separate sides of the bundle as shown