The weaving is going along slowly. The fine, fine weft breaks, a warp thread breaks. But the warp is OK and didn’t tangle, thank goodness. There are 491 ends in about 5” width for 96 ends in an inch. The threading photo shows most of the threads treaded through the heddles. It was a 10-hour job. I was careful and there were no threading mistakes! Hooray! The 12-dent reed has 8 ends per dent. Repairing a broken warp thread is a serious issue. It would be impossible if I didn’t have the lease sticks in behind the heddles. They allow me to track where the thread belongs and find the exact heddle required.