This comes from my new book, Weaving for Beginners. It is what I started all my beginning weaving students on and gives a very good foundation for future weaving. After the sampler was completed, the students planned their own original projects based on what they learned.
Why make a sampler?
This is the way many weavers try out new things. A sampler is a cloth with several ideas woven into it. Some ideas to try out are using different colors, threads, weaves, or your own designs. (See Figure 221.) You can try out more than one idea at a time by dividing the warp into sections.
For example, if you were sampling different colors, you might
make your warp have portions two to three inches wide, each with a different color you are considering. Notice that the sampler described in this chapter has two sections in the warp—each one a different color.
When weaving a sampler, you would try out those warp colors using the same ones as wefts, or perhaps, using other colors.
It is a good idea to try out different weaves as well. Say, you have four colors in the warp, and you try each color in the weft in plain weave–that would give you 16 different squares woven, or samples—useful information for designing a project. Weaving the colors again in twill weave would give you 16 more samples. Weaving the colors in herringbone, another 16 samples, and in a broken twill, 16 more.
You are weaving a plaid, so to speak, with the colors and threadings in the
warp repeated in the weft. You also can see how colors look when crossed
with other colors and how expected structures look when they are woven
with other threadings.
Sampling is fun because you aren’t under pressure to make a masterpiece.
This is the place to try out lots of ideas. Then you can put the best ideas into
a project, knowing that it is likely to please you.